Rebound Adjustment - Rock Shox BOXXER RACE Guía De Ajuste Rápido

XX
Bo er race tuning guide
r e B o u n d d a m p i n g
Rebound damping controls the speed at which the fork returns to full extension following compression. To adjust rebound damping, use
the rebound adjuster knob, located on the bottom of the drive side fork leg. When tuning rebound, remember that real world trail inputs
vary significantly from parking lot riding. The best way to fine tune rebound is to compare adjustments on a familiar section of trail.
We suggest you begin your tuning session by setting your fork to rebound as fast as possible without "topping out" or kicking back.
This allows your fork to follow the contours of the trail, maximizing stability, traction, and control. Make small adjustments from there
until you find a setting that works for your riding style. Keep in mind, if rebound damping is set too slowly the fork will "pack up" over
successive bumps; essentially reducing travel and causing the fork to bottom out.
To adjust your rebound damping, refer to the guidelines that follow.

reBound adjustment

Turn the red adjuster knob in the direction of the "rabbit" indicated
1
on the rebound speed decal to make the fork return to full extension
faster. Turn the red adjuster knob in the direction of the "turtle" to
make the fork return to full extension slower. A total of 18 clicks of
adjustment are available.
you have completed the rebound tuning of your BoXXer race front
suspension. you are now ready to move on to compression damping.
10
1
Copyright © SRAM Corporation • 2009