English
10
AROMA STRENGTH button
Brewing coffee
Brewing coffee with beans
Brewing coffee with pre-ground coffee
- Coffee temperature
- Stand-by time: this is the time after which the machine goes into standby
mode.
- Water hardness: to be able to adjust the machine settings to the water in
your region, please measure the water hardness.
- To activate the AquaClean filter
- To start descaling
Use the AROMA STRENGTH button to adjust the coffee strength (see
'Adjusting coffee strength') or to brew pre-ground coffee (see 'Brewing
coffee with pre-ground coffee').
Caution: Only use espresso beans. Never put ground coffee, unroasted
coffee beans or caramelized coffee beans in the bean hopper, as this may
cause damage to the machine.
To brew coffee, follow the instructions on the separate quick start guide.
To brew two cups of espresso or espresso lungo, press the button of the
desired beverage twice. The machine automatically carries out two grinding
cycles in sequence.
To stop dispensing coffee, press the OK button.
Note: Using the cover of the bean hopper helps to keep the beans fresh.
When you brew coffee with pre-ground coffee, use the measuring scoop
supplied to put the correct dose in the pre-ground coffee compartment. Do
not add too much pre-ground coffee to avoid the coffee grounds drawer
from getting clogged.
1 Open the lid of the pre-ground coffee compartment.