GENERAL SAFETY INSTRUCTIONS
WARNING:
Always inspect the jack before using, replace if damaged or malfunctioning.
Do not remove any of the labels from the jack.
Always ensure the jack is used on a hard flat and level surface
Never lift any load over the rated capacity.
Always center jack under load.
Never allow load to tilt on the jack as the jack may kick out causing injury to the operator and/ or
cause the load to fall.
When using more than one jack to lift a load, each jack must have the same lifting capacity of the
entire load being lifted.
Never force the Lifting Runners past the safety stop, as the Runner may come out of the jack and
could result in personal injury and properly damage.
Always keep the Steel Standard Column lubricated for ease of operation and to prevent against
rust.
5