IMPORTANT SAFETY CONSIDERATIONS
JACK USE AND CARE
Do not modify the jack in any way. Unauthorized modification may impair the function and/or
safety and could affect the life of the equipment. There are specific applications for which the
jack was designed.
Always check of damaged or worn out parts before using the jack. Broken parts will affect
the jack operation. Replace or repair damaged or worn parts immediately.
Store idle jack. When jack is not in use, store it in a secure place out of the reach of children.
Inspect it for good working condition prior to storage and before re-use.
Not for use by children or people with reduced mental capacity.
Do not use under the influence of drugs or alcohol.
Ensure children and other bystanders are kept at a safe distance when using product.
INSPECTION
Inspect the jack carefully before each use. Ensure the jack is not damaged, excessively worn, or
missing parts.
Do not use the jack unless it is properly lubricated.
Using a jack that is not in good clean working condition or properly lubricated may cause
serious injury.
Inspect the work area before each use. Make sure it is free and clear of any potential hazards.
SAFETY MARKINGS
WARNING:
1. Study, understand, and follow all instructions before operating this device.
2. Ensure the jack is lubricated and in good working order before each use.
3. Do not exceed rated capacity. This is a lifting and pulling device only. Do not use to support
load.
4. Ensure the work area is flat and sufficient to hold the load. Shifting of the load or work area can
cause the jack to loose stability and shift or fall suddenly.
5. Use chocks or a blocking device on load before using jack.
6. Lift only on areas of a vehicle as specified by the vehicle manufacturer.
7. Only use adaptors and chains supplied by the manufacturer.
8. Ensure all chains or adaptors used have a rated load greater than that of the jack.
9. Keep head and hands clear of the range of movement of the jack handle. Unexpected shifting of
the load or loss of grip on the handle could cause it to snap back.
10. Always keep handle against the standard bar when changing the reversing latch. This could
cause sudden movement of the handle.
11. Do not use this jack for any use other than the manufacturer specified usage.
12. Failure to heed these markings may result in personal injury and/or property damage.
4