Use And Operation - Blumfeldt 10032517 Manual Del Usuario

USE AND OPERATION

Note:
The heater must be properly installed before it is used.
This unit is equipped with one On/Off switch.
Remote control
• Press the On/Off switch to activate the heater.
• To operate the heater on low power (800 W), press on the left side button
of the remote control
• To operate the heater on medial (1000 W), press on the right side button
of the remote control.
• Press on both the left and right side button of the remote control for
maximum power (1800 W).
• To operate the LED light, press the top button of the remote control.
Operation of Activating button
• Press the On/Off switch to activate the heater.
• Touch the touch switch once to operate the heater on medial (1000 W)
power.
• Touch the touch switch twice to operate the heater on high (1800 W)
power.
• Touch the touch switch third times to operate the LED light without heat.
• Touch the touch switch four times to operate the LED light and to operate
the heater on high (1800 W) power.
• Touch the touch switch five times to shut off the light and heat.
EN
19