Auto-Learning Of The Gate-Leaf Travel - Motostar MP100 Manual De Instalación Y De Uso

Auto-learning of the gate-leaf travel

 Before calibrating the gate travel, position the gate half-way, check that the maneuvering area is clear of any obstruction and
check that there are mechanical opening and closing stops.
 The mechanical end-stops are obligatory.
Important! During the auto-learning, all safety devices will be disabled.
Select A3.
a 3
Press ENTER to confi rm.
i
Select 1 and press ENTER to confi rm the travel calibration
operation.
C l 2
The gate leaf will perform a closing maneuver until it reaches a
fi nal stop...
...then the gate will perform an opening maneuver until it reaches
o p 2
a positive stop.