For Your Safety - Spectra Precision Laser HV302 Guía De Uso

Introduction
Thank you for choosing one of the Spectra Precision Lasers from the Trimble family of precision lasers.
The HV302/HV302G laser is an easy-to-use tool that allows you to take accurate horizontal/vertical
measurements, 90°- and plumb beam transfer.

For Your Safety

For hazardless and safe operation, read all the user guide instructions.
-
Use of this product by people other than those trained on this product may result in exposure to
hazardous laser light.
- Do not remove warning labels from the unit.
- The HV302/HV302G is a class 3A/3R laser (<5 mW; 600 - 680 nm / G - 520 nm) IEC 60825-1:2014)
- Never look into the laser beam or direct it to the eyes of other people.
- Always operate the unit in a way that prevents the beam from getting into people's eyes.
- If initial service is required, which results in the removal of the outer protective cover, removal
must only be performed by factory-trained personnel.
Caution: Use of other than the described user and calibration tools or other procedures
may result in exposure to hazardous laser light.
Caution: Using different than described at the HV302/HV302G user guide, may result in unsafe
operation.
5