Scan Mode - Spectra Precision Laser HV302 Guía De Uso

Rotation
Press and release the M button at the Standard Display and select >>Rotation<<.
Press and release button E to display the actual rotation speed. Use the Up/Down buttons to select toggle
through the pre-selected rotation speeds 0, 10, 80, 200 and 600 rpm. Confirm the desired speed by
pressing the E button.
At 0 rpm, the beam stops automatically close to the +Y- axis center position.
When set up horizontally in automatic mode, using buttons Up/Down increases/decreases the rotor speed
from 10 to 80 and then continuously in 10 rpm increments up to 600 rpm.
Note: The zone-scan button at the laser can be used to stop the beam's rotation.

Scan Mode

Press and release the M button at the Standard Display and select >>Scan<<.
Press and release button E to display the actual scan size. Use the Up/Down buttons to toggle through the
pre-selected scan sizes 5°, 15°, 45°, 90°, 180° and 0. Confirm the desired scan size by pressing the E
button.
When working in horizontal automatic mode, press and hold button Up/Down to increase/decrease the line
Size in 5° increments. Press and hold button Left/Right moves the scan line to the right/left direction.
When used in automatic vertical mode, pressing and holding button Up/Down moves the scan line
counterclockwise/ clockwise. When set up vertical, pressing and holding button Left/Right moves the scan
line into the right/left direction regardless if in automatic or manual mode. For the first 4 seconds, the scan
line moves slowly than faster.
Note: The rotation control button at the laser can be used to stop the scan mode.
21