Emergency Stop - SPORTSTECH F10 Manual Del Usuario

Ocultar thumbs Ver también para F10:
Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

LUBRICATION
Lubricating under the running belt will ensure superior performance and extend its life expectancy. After the first 25
hours of use (or 2-3 months) apply some lubricant, and repeat for every following 50 hours of use (or 5-8 months).
How to check running belt for proper lubrication
Lift one side of the running belt and feel the top surface of the running deck. If the surface is slick to the touch, then
no further lubrication is required. If the surface is dry to the touch, apply some lubricant.
How to apply lubricant
Lift one side of running belt. Pour some lubricant under the centre of the running belt on the top surface of the
running deck. Run on the treadmill at a slow speed for 3 to 5 minutes to evenly distribute lubricant.
HINWEIS: DO NOT over lubricate running deck. Any excess lubricant that comes out should be wiped off.
Lubricant
1PC

EMERGENCY STOP

Before beginning a workout session ensure that the Safety Tether Key is properly placed onto the Computer Console
and the Safety Clip is securely attached to an article of your clothing. If you fall the clip will pull out the SAFETY
TETHER KEY from the Computer Console and the running belt will stop immediately for emergency stop, helping to
prevent injury.
Replaced the Safety Tether Key onto the Computer Console. Press the START button to begin exercise again.
Safety tether key
36
Tabla de contenido
loading

Tabla de contenido