Warn 74500 Manual Del Usuario página 11

CAUTION
This WARN Wireless Control
System has been designed to
minimize interference from other
sources of radio.
•
Always be aware that obstacles
and other radio transmission
sources may affect performance.
•
Always insure the matching
WARN transmitter is closer to its
receiver than other transmitters in
use during winching.
IN
OUT
OPERATION
1. Activate the system by pressing both buttons
simultaneously and holding for 3 seconds until GREEN
light comes on.
2. Press the power IN or power OUT button to use the winch.
LED Indicator Light
Steady GREEN - system active and ready to use
Steady RED - winch powering in or out
Flashing RED - battery low
LED indicator light
Power IN
TROUBLESHOOTING
If the winch does not power in or out when remote buttons
are pushed:
1. Check that the wireless system has been activated
(GREEN LED on remote is ON).
2. Check all electrical connections. Verify that connections
follow the wiring diagram and instructions.
3. Insure that 10 seconds have passed since the standard
wired control system was last used.
WARN Wireless Control Installation Guide 9
Power OUT
Press and hold
both buttons for
3 seconds to
activate wireless
system.