Honeywell Prestige 2.0 IAQ Instrucciones De Instalación
Honeywell Prestige 2.0 IAQ Instrucciones De Instalación

Honeywell Prestige 2.0 IAQ Instrucciones De Instalación

Alertas y diagnóstico delta t con el termostato
Idiomas disponibles

Idiomas disponibles

Enlaces rápidos

Alerts and Delta T Diagnostics
with the Prestige® 2.0 IAQ
Thermostat
MOUNTING LOCATIONS
Refer to the guidelines below and Fig. 1–5 for mounting
locations of the Discharge and Return Air Temperature
Sensors.
Discharge Air Temperature
Sensor Mounting Location
1. Mount the Discharge Air Temperature Sensor on
the supply duct in a location where the air is mixed
well. Mount the Discharge Air Temperature Sensor
out of sight of the A-Coil/Heat Exchanger when
possible. See Fig. 1.
2. When possible, mount the Discharge Air
Temperature Sensor upstream of a Steam
Humidifier, a Fan Powered Humidifier or a
Dehumidifier that is ducted to the supply. See Fig.
2–3.
3. If space does not allow a Discharge Air
Temperature Sensor upstream of a Steam
Humidifier or Fan Powered Humidifier, mount the
Discharge Air Temperature Sensor downstream of
the Humidifier. See Fig. 2. When setting the Delta
T Limits (see "Set Delta T Limits" on page 5), be
sure to consider the affect that the humidifier has
on Delta T.
4. If a Bypass Humidifier is installed, the Discharge
Air Temperature Sensor can be mounted
downstream or upstream of the Bypass Humidifier.
Mounting the sensor downstream of the Bypass
Humidifier is the preferred location, because the air
is mixed well. See Fig. 4–5.
INSTALLATION INSTRUCTIONS
Return Air Temperature Sensor
Mounting Location
1. Install the Return Air Temperature Sensor on the
return duct in a location where the air is mixed well.
Mount the Return Air Temperature Sensor
downstream of a Bypass Humidifier, Dehumidifier
or Ventilator. See Fig. 1–5.
MOUNT DISCHARGE
SENSOR HERE
VENTILATOR
OR
DEHUMIDIFIER
MOUNT RETURN
SENSOR HERE
DOWNSTREAM OF
VENTILATOR OR
DEHUMIDIFIER
A-COIL
HEAT
EXCHANGER
BLOWER
Fig. 1.
69-2678EFS-03
M33074
Tabla de contenido
loading

Resumen de contenidos para Honeywell Prestige 2.0 IAQ

  • Página 13: Alertas Y Diagnóstico Delta T Con El Termostato Prestige® 2.0 Iaq

    Alertas y diagnóstico Delta T con el termostato Prestige® 2.0 IAQ INSTRUCCIONES DE INSTALACIÓN UBICACIONES DE MONTAJE preferente es montar el sensor por debajo del humidificador de desviación porque el aire se mezcla bien. Consulte las Fig. 4–5. Refiérase a las pautas que siguen y la Fig. 1–5 para las ubicaciones de montaje de los sensores de temperatura Ubicación de montaje del sensor del aire de descarga y retorno.
  • Página 14: Instalación

    ALERTAS Y DIAGNÓSTICO DELTA T CON EL TERMOSTATO PRESTIGE® 2.0 IAQ MONTE EL UBICACIÓN ALTERNA PARA MONTAJE DEL SENSOR HUMIDIFI- HUMIDIFI- SENSOR DE DE DESCARGA. CUANDO CONFIGURE LOS LÍMITES, CADOR CADOR DESCARGA AQUÍ CONSIDERE EL EFECTO QUE EL HUMIDIFICADOR DE VAPOR O TIENE SOBRE DELTA T.
  • Página 15: Alertas Y Diagnóstico

    ALERTAS Y DIAGNÓSTICO DELTA T CON EL TERMOSTATO PRESTIGE® 2.0 IAQ ALERTAS Y DIAGNÓSTICO LÍMITE MÁXIMO DELTA T El termostato Prestige utiliza alertas y diagnóstico para brindar mayor confort y eficiencia. Las alertas y el diagnóstico pueden notificar a los consumidores cuándo se necesita mantenimiento o servicio y mostrar su información de contacto para que sea fácil comunicarse LÍMITE MÍNIMO DELTA T...
  • Página 16: Configuración De Alertas Y Diagnóstico

    ALERTAS Y DIAGNÓSTICO DELTA T CON EL TERMOSTATO PRESTIGE® 2.0 IAQ Configuración de alertas y diagnóstico 1. Configure los sensores de aire de retorno y descarga eligiendo los recuadros de la pantalla. Estos sensores se utilizan para medir Delta T. Fig.
  • Página 17: Realice Una Prueba Por Cada Etapa

    ALERTAS Y DIAGNÓSTICO DELTA T CON EL TERMOSTATO PRESTIGE® 2.0 IAQ 4. Presione Configuración diagnóstico. Fig. 13. Fig. 15. 6. Cuando haya completado la Configuración del 5. Proceda a “Realice una prueba por cada etapa”. instalador, se le pedirá que termine de configurar el diagnóstico.
  • Página 18: Configure Los Límites Delta T

    ALERTAS Y DIAGNÓSTICO DELTA T CON EL TERMOSTATO PRESTIGE® 2.0 IAQ Configure los límites Delta T alerta al usuario (Mostrar alertas Delta T al usuario, ISU 13190). El usuario es alertado por default. Por ejemplo, si 1. Presione Etapa 1 para configurar los límites y el 10 de los últimos 15 ciclos tienen la misma falla, se tiempo de funcionamiento (consulte a la Fig.
  • Página 19 ALERTAS Y DIAGNÓSTICO DELTA T CON EL TERMOSTATO PRESTIGE® 2.0 IAQ 69-2678EFS—03...
  • Página 20 ALERTAS Y DIAGNÓSTICO DELTA T CON EL TERMOSTATO PRESTIGE® 2.0 IAQ Automatización y control desenlace Honeywell International Inc. 1985 Douglas Drive North ® Marca Registrada en los Estados Unidos © 2011 Honeywell International Inc. todos Golden Valley, MN 55422 Los Derechos Reservados 69-2678EFS—03 M.S. Rev. 10-11 customer.honeywell.com...

Tabla de contenido