General Instructions; Safety Instructions - Grammer MSG85 Manual De Instrucciones

General instructions

•
The operating instructions should be read in full before use.
•
The operating instructions should be kept in the vehicle and always be at hand.
• The driver seat may only be fitted, serviced and repaired by specialist personnel,
in accordance with national regulations and the vehicle manufacturer's fitting instructions.
In the event of incorrect assembly and/or repair, all warranty and liability claims shall be null
and void.
The national fitting regulations can be obtained from GRAMMER or from agencies of the
company, or from the vehicle manufacturer.
•
A correctly functioning and individually adjusted driver seat is essential to your health. Take
adequate care of your seat and have it serviced regularly to ensure that it functions cor-
rectly.
The functional checks should be carried out at least as regularly as vehicle services
(see maintenance plan for vehicle).

Safety instructions

•
To prevent damage to the driver's back, the seat must be adjusted for the driver's weight
before use and before every change of driver.
•
To prevent injury, no objects should be placed within the moving area of the driver seat.
• To eliminate any risk of accident, the settings must be checked to ensure they are correctly
engaged before the vehicle is driven.
•
Adjustments must not be made while driving.
•
When the backrest upholstery has been removed, the backrest frame must be sup-
ported, for example held in place, before the backrest adjuster is operated. If you fail to do
so, there is a danger that the backrest frame may jerk forward and cause injury.
• If you make any changes to the standard seat (for example fitting parts which are not origi-
nal GRAMMER parts) it may no longer meet the safety standards to which it is tested.
Functions may be impaired, threatening your safety. For this reason, any change in de-
sign of the seat must be approved by GRAMMER.
•
Seatbelts can be retrofitted to the driver seat. Seatbelts may only be fitted on the ap-
proval of the vehicle manufacturer, as they increase the load in the seat mounting area.
Seatbelts must be fitted in accordance with specific national regulations and guidelines, and
must be approved by GRAMMER.
18
GB