Seat Functions And Operation; Weight And Height Adjustment - Grammer MAXIMO XT EVOLUTION DYNAMIC Manual Del Usuario

Seat functions and operation

Weight and height adjustment

The seat is automatically adjusted for the
driver's weight when the driver sits down.
The adjustment process automatically starts
after approx. 2 seconds.
Note:
Leaving the seat for a short time of less than
6 seconds will not be detected as a change of
driver. Thus, the weight will not be adjusted
again automatically.
The seat height can be set pneumatically and
is continuously adjustable.
Pull or press this handle to move the seat
upwards or downwards. If adjustment reaches
the top or bottom end stop, the height will be
adjusted automatically, so as to ensure a
minimum spring travel.
Release the handle, when the desired height
position or the upper end stop is reached.
Note:
(For seat models with a compressor for air
supply purposes)
In order to avoid compressor damage during
height adjustment or until the upper end stop
is reached, the compressor must be operated
for 1 minute at the maximum.
GB
27