5-7.Installing Wireless Remote Controller; 5-8.Specifications - Panasonic CZ-RWSU2N Manual Del Usuario

Installation location for the Wireless Remote Controller
 If a remote controller is to be operated from a remote control holder that is hung on a wall, turn on the lights in
the room as well as any electrical appliances and then check to make sure the air conditioner works with the
remote controller in the location where it will be installed. If it works, continue with installation.
 If the main sensor is to be switched from the indoor unit to a remote controller, pay attention to the following
when installing.
• Locate where no warm or cold air will affect it.
• Locate in a place free from direct sunlight.
• Locate where it will not be affected by any other heat/cold source.
When installing the remote controller onto a wall, etc.
Screw the remote control
holder.
Remote control holder
Wireless Remote Controller
Model No.
Dimensions
Weight
Power Source
Clock Accuracy
Receiver
Model No.
Dimensions
Weight
Power Source
Receiver
Model No.
Dimensions
Weight
Power Source
Operation panel
Model No.
Dimensions
Weight
Power Source
5-7. Installing Wireless Remote Controller
Installing the remote
controller
2
Press
1
Insert
5-8. Specifications
CZ-RWSU2N, CZ-RWST3N, CZ-RWSD2, CZ-RWSL2N
(H)182 mm × (W) 61 mm × (D)18.5 mm
140g (Including batteries)
Two LR03 size batteries
±30 seconds / month (at 25 °C)
CZ-RWSU2N, CZ-RWST3N, CZ-RWSD2
CZ-RWSU2N (H) 200 mm × (W) 200 mm × (D) 25.2 mm
CZ-RWST3N (H) 65 mm × (W)141 mm × (D) 22.5 mm
CZ-RWSD2 (H) 65 mm × (W)130 mm × (D) 22 mm
CZ-RWSU2N 140g
CZ-RWST3N 85g
CZ-RWSD2 82g
DC16V(supplied from indoor unit)
CZ-RWSL2N
(H) 37 mm × (W) 70 mm × (D) 22 mm
15g
DC5V(supplied from operation panel)
CZ-RWSL2N
(H) 55 mm × (W)120 mm × (D)16 mm
75g
DC16V(supplied from indoor unit)
Common to All Models
 Press at the installation location
on the wall, and check that normal
receiving is possible.
 Remove the remote controller from the
remote control holder.
17