Before You Begin - Kohler K-2974 Guía De Instalación Y Cuidado

Tools
Hacksaw or
Adjustable
Tubing Cutter
Wrench
Solder
Sealant Tape

Before You Begin

CAUTION: Risk of property damage. Do not apply direct
heat to the valve body. Excessive heat will damage the rubber
valve seals and plaster guard, resulting in the potential for
leaking. If desired, carefully remove the internal valve
components before soldering. Reassemble and securely
tighten the internal valve components.
NOTICE: Do not force the handle in any direction. Forcing the
handle will damage the valve.
Observe all local plumbing and building codes.
Shut off the main water supply.
Carefully plan the installation before beginning. Carefully read
the entire instructions. Component location, spacing, and
situational requirements can vary.
Do not discard the plaster guard from the valve until instructed
to do so.
1205547-2-A
Plus:
• 1/2" or 3/4" nominal
copper tubing & fittings
Propane
Torch
2 Kohler Co.