AmazonBasics B00FA4MP5O Manual Del Usuario página 6

Instruction of switch, button and indicator
Ready
Plug in the shredder. Slide the switch to READY(
shredder is in ready status and you can shred paper and
other media.
Forward
Slide the switch to FORWARD(
operating in manual feed mode. Occasionally when paper
is so jammed that it will not come out using the reverse
function described above, you can switch between reverse
and forward. Take care not to switch too quickly between
reverse and forward as this can damage the shredder.
Overheat
Shredder will overheat if used continuously for approximately
9-12 minutes. It will stop working and overheat indicator light
will turn on. Allow shredder to cool down. You can resume
6
), the
). The shredder will start
Reverse
A jam may happen if you shred over the maximum sheet
capacity. Slide the switch to REVERSE (
paper will be reversed back. Once the jam is cleared, slide
switch back to READY (
normal operation.
Slide the switch to OFF (
position before emptying the bin.
Empty the wastebasket
Make sure to empty the pull-out waste basket regularly to
avoid shreds from jamming in the cutters.
). The jammed
), the shredder is ready for
). When not in use, it is