Replacing The Appliance Light; Start Using Your New Refrigerator - mabe MSC504SORBS0 Manual Del Usuario

This illustration should be used as a reference only. Actual con gu-
ration depends on the physical product.
If the refrigerator door is low
Open the door. Use a wrench to loosen the locking nut and rotate
counterclockwise the adjusting nut to raise the height of the door.
Once the doors are aligned, tighten the locking nut by turning it
counterclockwise.
If the refrigerator door is high
Open the door. Use a wrench to turn the adjusting nut clockwise to
lower the height of the door. Once the doors are aligned, tighten
the locking nut by turning it counterclockwise.

replacing the appliance light

Replacement or maintenance of the LED lamps should be carried
out by authorized service center personnel.

start using your new refrigerator

• Before initial start, keep the refrigerator still for half
hour before connecting it to power supply.
• Before loading any fresh or frozen foods, the refrig-
erator should have run for 2-3 hours, or for above 4
hours in summer when the ambient temperature is
high.
Model SxS 525
45