Kohler STERLING 66050100 Guia De Instalacion página 20

Finished Deck
Material
Drop-In Installation
14. Finish the Installation
CAUTION: Risk of property damage. Make sure that a watertight seal has formed around the
whirlpool drain and overflow, or the whirlpool may leak.
For All Installations
Apply clear 100% silicone sealant to all openings around the valves and outlets before installing the
cover plates or flanges. Allow sealant to set.
Install the faucet trim according to the faucet manufacturer's instructions.
Remove the protective covering from the basin of the whirlpool.
Turn on the hot and cold water supplies to the whirlpool.
Make adjustments on the faucets or controls according to the manufacturer's instructions.
Apply clear 100% silicone sealant between the whirlpool and the finished floor or baseboard.
Allow the sealant to set according to the manufacturer's instructions.
For Miscellaneous Accessory Installations
CAUTION: Risk of property damage. Do not make additional holes in the wall surround or whirlpool
without adding adequate clear 100% silicone sealant. Additional holes made to install any accessories
may cause leakage. Improper installation of accessories may void the warranty.
NOTE: For installations with wall surrounds, install the shower curtain rod above the top of the wall
surrounds.
Install any accessories according to the manufacturer's instructions.
Verify that all holes in the finished wall are properly sealed with clear 100% silicone sealant.
When the sealant has set, check for leaks.
1016904-2-C
Apply clear 100% silicone sealant to
the edges of the water-resistant deck
material and the finished deck.
Water-Resistant
Deck Material
Framing Material
Whirlpool
Island Installation
20
Wall Material
Tile
Whirlpool
Apply clear 100%
silicone sealant.
Tile
Brick
Approved Tile Backing
Sterling