Information Codes; Warranty And Service; Warranty - Dacor DTI36P876BB Manual Del Usuario

Information codes

Displayed
Possible cause
code
The top sensor is open when the
burner is operating.
C0
The top sensor is short when the
burner is operating.
This code appears if the internal
C1 temperature of a burner rises
abnormally high.
The IGBT sensor is open when the
burner is operating.
C2
The IGBT sensor is short when the
burner is operating.
The key is pressed for more than
d0
8 seconds.
Communications between main
F0
and sub PCBs failed.
Communications between main
F1
and EEP-ROM failed.
The touch-enabled IC
F2
communicates abnormally.
UP The voltage is too high or low.
A2 DC Motor Locking Information
DTI30P876BB,DTI36P876BB_DG68-01296A-00_EN+MES+CFR.indb 35
Solution
Turn off the cooktop and then restart. If
the problem continues, unplug the power
cord for 30 seconds or more and then
reconnect. If the problem is not fixed,
please contact a local Dacor service center.
Check if the key pad is wet or a key is
depressed. If the problem continues,
restart the appliance using the POWER
button. If the problem still continues,
contact a local Dacor service center.
Restart the appliance using the POWER
button. If the problem continues,
disconnect power for more than 30
seconds. Then, restart the appliance. If
the problem still continues, contact a local
Dacor service center.
Check the power connection and make
sure to turn the appliance on after
regulating the voltage (208 V to 240 V).
It occurs when DC Motor cannot operate
due to defects of PCB, wiring or blockage
of on motor blade.

Warranty and Service

Warranty

Review this section to learn the warranty and non-warranty terms and conditions
concerning this product. For details/clarifications, contact Dacor.
What Is Covered—Certificate of Warranties: Dacor Cooktops
Within the 50 States of the USA, District of Columbia, and Canada*
Full 1-Year The warranty applies only to the Dacor appliance sold to the first-use
Warranty purchaser, starting from the date of original retail purchase or closing
date for new construction, whichever period is longer. The warranty is
valid on products purchased brand new from a Dacor Authorized Dealer
or other Dacor authorized seller.
If your Dacor product fails to function within one year of the original
date of purchase due to a defect in material or workmanship, Dacor will
remedy it without charging you.
All cosmetic damage (e.g., scratches on stainless steel, paint/porcelain
blemishes, etc.) to the product or included accessories must be reported
to Dacor within 60 days of the original purchase date to qualify for
warranty coverage.
Coverage Service will be provided by a Dacor-designated service company during
Limitations regular business hours. (Service providers are independent entities and
are not agents of Dacor.)
These types of products carry a one-year parts warranty only:
• Dealer-display and model-home-display products with a production
date greater than 5 years
• Products sold "As Is"
• Products installed for non-residential use (e.g., religious
organizations, fire stations, bed and breakfast, spas, etc).
All delivery, installation, labor costs, and other service fees are the
purchaser's responsibility.
The warrant is null and void if the product's serial numbers and/or tags
are altered/defaced/missing.
The owner must provide proof of purchase or a closing statement for
new construction upon request.
All Dacor products must be accessible for service.
English 35
2020-06-02 11:21:04