Connect Hose And Water Supply To Pump; Checklist Before Starting Engine - Craftsman 580.754911 Instrucciones De Uso

Connect Hose and Water Supply to Pump

NOTICE DO NOT run the pump without the water
NOTICE Remove and discard the shipping caps from
attaching hoses.
1. Uncoil high pressure hose and attach one end of
WARNING The high pressure stream of water
amputation.
2. Attach other end of high pressure hose to high
inspect inlet screen (A). Clean screen if it contains
pressure washer if inlet screen is damaged or
missing.
4. Run water through garden hose for 30 seconds to
NOTICE DO NOT siphon standing water for the water
NOTICE
or check valve) at pump inlet could cause pump or
inlet connector damage.
WARNING
of air and impurities.

Checklist Before Starting Engine

1. Be sure to read Safety Rules and Operation
2. Make sure handle is in place and secure.
engine crankcase.
DO NOT run
4. Add proper fuel to fuel tank.
5. Check for proper hose connections (high pressure
or damage to the high pressure hose.
A
10
B
B) on the gun