Important Safety Information; Intended Use; Qualification Of The Staff - Heyl Testomat 2000 Instrucciones De Operación

Important safety information

6
Important safety information

Please read these operating instructions carefully and completely
prior to working with the instrument.

Ensure that these operating instructions are always available for all
users.

These operating instructions must always be passed on to the new
owner should Testomat 2000

Always adhere to hazard warnings and safety information when
using reagents, chemicals and cleaning agents. Please adhere to
the respective safety data sheet! Download the safety data sheets
for the supplied reagents at

Intended use

®
Testomat 2000 is used for the automatic determination and
monitoring of residual total hardness (water hardness), residual
carbonate hardness, as well as the minus m-value and the p-value in
water. The measurement parameters and the measuring range are
determined by the indicator selection and according to the user
programming.

Always adhere to the performance limits stated in the section
entitled Technical data.

Always observe the application areas/application limits of the
indicators and the requirements of the medium being measured.
To ensure correct and intended usage, always read and understand
these instructions, especially the section entitled
information, prior to use.
The instrument is not used as intended if
 it is used in areas not specified in these instructions.
 it is used in areas which do not correspond to the ones described
in these instructions.

Qualification of the staff

Assembly and commissioning require fundamental electrical and
process engineering knowledge as well as knowledge of the
respective technical terms. Assembly and commissioning should
therefore only be carried out by a specialist or by an authorized
individual supervised by a specialist.
A specialist is someone who due to his/her technical training, know-
how and experience as well as knowledge of relevant regulations can
assess assigned tasks, recognize potential hazards and ensure
appropriate safety measures. A specialist should always adhere to
the relevant technical regulations.
®
change hands.
http://www.heyl.de/en .
Important safety