Sequential Washing - LaCimbali M100 GT Manual De Uso E Instalación

SEQUENTIAL WASHING

Procedure to follow at the end of the working day on all groups or when signalled by the machine.
1
EXECUTE GROUP 1
WASH
The sequential washing mode appear
on the display.
4
Insert the rubber disk into the lter
holder with its lter.
7
EXECUTE GROUP 1
WASH
Press the icon
10
REMOVE FILTER HOLDER
GROUP 1
push
At the end of the group 1 wash cycle,
the message "REMOVE FILTER
HOLDER GROUP 1" will appear.
13
EXECUTE GROUP 2
WASH
push
At the end of the group 1 rinse cycle,
the message "EXECUTE GROUP 2
WASH" will appear.
2
Remove the filter holder from the
coffee group.
5
Pour in a packet or dosing cupful of
detergent powder.
8
INSERT FILTER HOLDER
GROUP 1
. Press the icon
11
Remove the lter holder and press
the icon
14
Repeat the operations described
above for all machine groups.
push
.
.
29 EN
3
Using a brush, clean the cover
gasket.
6
H o o k t h e f i l t e r h o l d e r t o
Group 1.
9
GR 1 WASH
015%
The Group 1 wash cycle will start
and the "GR1 WASH" message will
appear on the display.
12
GR 1 RINSE
065%
The message "GR1 RINSE" will
appear.
Do not remove the lter holder during
coffee dispensing.