Description Display Symbols - LaCimbali M100 GT Manual De Uso E Instalación

11. Description display symbols

WATER LEVEL
This symbol indicates the boiler water level.
During the loading phase, the bottom part of the
icon blinks.
When the optimum level is reached, the symbol
looks like this:
RESISTANCE
This symbol indicates that the resistance is
activated and functioning; a thicker luminous ow
passing through the resistance shows the electric
heating is on.
When the boiler pressure reaches the set value,
the icon looks like this:
This indicates that the heating resistance has
been disabled.
Note: the customer cannot switch on or switch
off the electric heating.
When the on/off function is programmed, the
electric heating takes place automatically.
SEVICE BOILER PRESSURE
This symbol indicates the boiler pressure value.
If the icon
will be displayed analogically. This will be shown
on the display:
Press again the icon
regular display mode.
.
.
is pressed, the pressure gauge
to return to the
CUP-WARMER
WI-FI
This symbol appears on the display when the
Wi-Fi module is in the machine.
BLUETOOTH
These symbols refer to Bluetooth communication:
- the red icon indicates the presence of the
Bluetooth module on the machine;
- the blue icon indicates that the machine is
communicating with a Bluetooth grinder-
dispenser.
USB
This symbol appears on the display when a USB
pen drive is connected.
SD
This icon indicates the presence of an SD micro
chip in the CPU board of the machine.
PAYMENT SYSTEMS
This icon indicates that the machine is connected to a
payment systems interface and is con gured to work with it.
Dispensing is therefore possible subject to approval by the
payment system.
- the red icon indicates that the cash system has
denied the transaction;
- the blue icon indicates that the cash system has
approved the transaction.
CONTROL OF THE FLOW (ONLY IF IN USE)
When this icon lights up it means that it is necessary
to adjust the grinder-dispenser to tighten or loosen the
grinding, in order to return the coffee dose to the correct
parameters.
The icons that are shown are:
means that the grinding needs to be loosened.
( ow of coffee is lower than the reference).
means that the grinding needs to be tightened.
( ow of coffee is greater than the reference).
Note. The number next to the icon (1 or 2) indicates the
grinder-dispenser that must be used.
The icon appears on the display instead of the level symbol.
11 EN
These symbols indicate the
power currently selected by
the cup warmer.