CycleOps PRO 300PT Manual De La Consola página 10

CLOCK 02:06:07P
MPH H
WATTS
CAD
MODE
SELECT
Tachometer
This functions as a visual interpretation of
how hard you are working compared to a
fixed wattage value. From the dashboard
display press [UP ARROW] or [DOWN
ARROW] to move the cursor to [H]. Press
[SELECT] to change the maximum tachome-
ter value (400, 600, 800 or 1000 watts).
CLOCK
02:06:07P
MPH H
WATTS
CAD
MODE
SELECT
Interval Mode
The console works as a lap marker, and is
essentially always on.
1) From any location on the dashboard dis-
play press and release [MODE] and
[SELECT] simultaneously. [INT] and the
new interval # will briefly appear before dis-
appearing again to the background in the
field located above [MENU].
10
MENU
HR
Real-time display of the current wattage
placed on the flywheel. This is your power
reading. Watts is derived from the follow-
ing equation:
Watts (Power) = Torque x Angular Velocity
MENU
HR
2) To view interval specific data in the dash-
board display press [UP ARROW] or [DOWN
ARROW] until the cursor icon is in the space
above [MENU]. Press and hold [MODE] for
two (2) seconds. This brings interval mode
to the foreground and [INT] and the inter-
val number will constitute a third line in the
display.
CLOCK 02:06:07P
0
0
MPH H MENU
0
0
WATTS HR
CAD
MODE
SELECT
Watts
CLOCK 02:06:07P
INT: 1
MPH H MENU
WATTS HR
CAD
MODE
SELECT
Interval Mode
CLOCK
MPH
0
CAD
MODE
Watts INCH-LBS
NOTE: If you press [SELECT] while the cur-
sor is pointing to [WATTS] the line changes
to [INCH-LBS]. This is the raw torque value
that is being applied to the hub, NOT your
power in watts.
CLOCK
MPH
CAD
MODE
3) When you wish to relegate the interval
information to the background press
[MODE] for two (2) seconds
02:06:07P
H MENU
INCH-LBS HR
SELECT
02:06:07P
INT: 1
H MENU
WATTS HR
SELECT
Interval Mode