Power Assistance; Pedalling Assistance; Description Of The Display Functions; Description Of The Controls - Wayscral EVERYWAY E-250 Manual Del Usuario

E.

Power assistance

I.

Pedalling assistance

The user must rotate the pedal forward to benefit from the motorised assistance. This is an important
safety feature. This power-assisted bicycle provides motorised assistance up to a speed of 25 km/h.
Beyond that, the engine will stop. You can go faster, but you will have to do it on your own, without
any power assistance.
The engine will not operate until you have completed a quarter turn with the pedal. This feature
protects the engine and its controller, and extends the life of electrical components.
Precautions
Pay attention to safety during use, do not connect or disconnect the screen when it is switched on.
Avoid any knocks.
The screen uses a waterproof protective film; please do not remove it to ensure the
watertight performance of the screen is not affected.
If the screen is not working properly, it should be repaired as soon as possible.
II.

Description of the display functions

1.

Description of the controls

In the following description, the button
is named 【HIGH】 and the button
The button
2.

Switching on

Hold down the 【MODE】 button to turn the screen on and activate assistance, hold the 【MODE】
button down again to stop it.
If the electric bike is not used for more than 10 minutes, the screen will turn off
automatically.
3.

Screen interface

Once powered up, the screen will display the following interface:
is named as 【MODE】.
is named 【LOW】.
50