HoMedics MCS-300H Manual De Instrucciones E Información De Garantía página 6

Almohadón para masaje shiatsu y vibración
Ocultar thumbs Ver también para MCS-300H:
Idiomas disponibles

Idiomas disponibles

Shiatsu and Vibration
Massaging Cushion
NOTE: When
Moving Massage Mechanism
"POWER" button
is pressed for
Heat Button
first-time use, the
for soothing heat when
moving shiatsu
massage is on, simply
mechanism will
press the heat button
automatically
and the corresponding
move to the lowest
red l.E.D. light will
position before
illuminate. To deselect,
starting a massage
press the button again
program. After initial
and the corresponding
use, mechanism
l.E.D. light will turn off.
will always park
for your safety, heat
at lowest position.
cannot be turned
See note below
on if massage is not
regarding parking.
selected.
NOTE: The moving
Shiatsu massage
Power Button
mechanism always
To turn on the massage
"parks" or finishes
functions, first press
in its lowest
the pOWEr button.
position. It will
The l.E.D. indicator will
continue to this
illuminate and confirm
position after the
your selection. To
power has been
turn off the massage
turned off. If the
functions, simply press
electrical supply is
the button again. The
interrupted, when
l.E.D. indicator will
power is restored,
blink while the shiatsu
the mechanism will
massage mechanism
"park" or move to
returns to its lowest point
its lowest position.
and then it will turn off.
CON
10
Demo Button
for a brief demonstration of the features of the shiatsu Massaging Cushion,
press the Demo button. The unit will briefly go through each function. Once
complete, the unit automatically turns off. The l.E.D. light will blink to indicate the
active functions.
Shiatsu Massage
shiatsu is a deep kneading circular massage. This unit features a massage
mechanism that travels up and down the back of the cushion.
Vibration Massage
add invigorating vibration massage to any shiatsu massage program.
Shiatsu Massage
program buttons
Zone buttons cause the moving shiatsu massage
mechanism to target specific areas of the back:
Full Back
The shiatsu massage mechanism travels up and
down the back.
Upper Back
The shiatsu massage mechanism focuses from the
mid to upper back.
Lower Back
The shiatsu mechanism focuses from the mid to
lower back.
To select a massage area, simply press the button
and the corresponding l.E.D. light will illuminate.
To deselect, simply press the button again and the
corresponding l.E.D. light will turn off.
NOTE: There is a 15-minute auto shut off on
the unit for your safety.
Moving Shiatsu
massage mechanism
The actual product materials and fabrics
may vary from the picture shown.
1 1
loading

Este manual también es adecuado para:

Mcs-300hw