Replace The Battery Of Ir Handset; Install The Unit (Din Front Mount) - Multilaser explorer Manual Del Usuario

Ocultar thumbs Ver también para explorer:
Tabla de contenido
Idiomas disponibles

Idiomas disponibles

Replace the battery of IR Handset

Replace the Battery
When the operational range of the remote control becomes short or non-functions while operating. Replace a new CR2025 battery.
Make sure the battery polarity before replacement.
Pull out the battery holder while pressing the stopper 1.
1.
Pull the button type battery (+) mark upward into the battery holder.
2.
Insert the battery holder into the remote controller.
3.

Install the unit (DIN front mount)

DIN front mount (method A)
Installing the Unit
Dashboard
1.
Holder
2.
After inserting the holder into the dashboard, select the appro-
priate tab according to the thickness of the dashboard material and
bend them inwards to secure the holder in place
Screw.
3.
Dashboard
1.
Nut (5mm)
2.
Plan washer
3.
Screw (5x25mm)
4.
Screw
5.
Strap
6.
Be sure to use the strap to secure the back of the unit in place.
The strap can be bent by hand to the desired angle.
Plain Washer
7.
multilaser
www.
49
.com.br
Tabla de contenido
loading

Este manual también es adecuado para:

ClassWide tv

Tabla de contenido