Notes On Installation; Precautions - Multilaser explorer Manual Del Usuario

Notes on installation

The unit is designed for 12V DC, negative ground operation system only. Before installing the unit, make sure your vehicle is connected
to 12V DC negative grounded electrical system.
The negative battery terminal must be disconnected before making connections, which can reduce damaging to the unit due to short
circuit.
Be sure to connect the speaker (-) leads to the speaker (-) terminal. Never connect the left and right channel speaker cables each other
or to the vehicle body. Do not block vents or radiator panels. Blocking the will cause heat to build up inside and may result in fire..
After the completion of the installation and begin to operate the unit (including replacing the battery), please press the reset button on
the front panel with pointed objects (such as ball pen) to set the unit to initial status.

Precautions

The unit can play the following disc only:
type of disc recorded material
DVD video and audio
VCD video and audio
CD audio
MPEG4 / DIVX video and audio
MP3 / WMA compressed digital audio
Note: The unit is compatible with DVD,DVD+/-R, VCD 1.0/2.0/3.0, SVCD, CD, CD-R, CD-RW and JPEG.
• Do not attempt to modify the unit, modifying the unit may cause an accident.
• Stop the vehicle before carrying out any operation that could interfere with your driving.
• Do not turn on the unit if the temperature inside the vehicle is out of –20C to 60C.
• This product is designed for one single video output, please use a splitter if you would like to connect for multiple video output.
Handle the disc by its edge to
keep the disc clean, and do not
touch the surface.
Do not use CDs with labels or
stickers attached, which may
leave a sticky residue while
beginning to peel off.
size of disc
120,0 mm
120,0 mm
120,0 mm
120,0 mm
120,0 mm
Do not use your CDs with paste
residue or ink attached.
Clean the discs with an optional
cleaning cloth. Wipe each disc
from center out.
multilaser
www. .com.br
29