Klarstein Robuchon Manual Del Usuario página 41

• Never move the baking trays or baking grates while they are hot, but rather allow
them to cool down first.
• Before cleaning and maintenance, always switch off the appliance and unplug the
appliance from the mains socket.
• This appliance is designed for household use and can be installed in standard
kitchens or residential units.
• All surfaces or furniture surrounding the oven and all materials used for installation
must withstand at least 85 ° C while the appliance is in use.
• Some vinyl and laminate types are particularly prone to heat damage and high
temperature decolourisation. Before installing the device, check which surfaces are
present.
• The user is responsible for any damage caused by the installation of the device in
the vicinity of non-heat-resistant materials or due to insufficient distance to furniture.
• Only install and follow the device in accordance with the requirements listed in this
manual.
• The installation must be carried out by a qualified person or a qualified electrician.
• Dispose of the packaging material in a timely manner and ensure that it does not
get into the hands of children as this may cause suffocation.
• Do not place heavy objects on the oven door and do not lean against them while
the door is open, as this could damage the hinges.
• Do not place containers containing hot oil or grease in unattended areas, as these
may give rise to a fire hazard.
• Do not place pans, baking trays or aluminium foil directly on the bottom of the oven
as this could lead to heat build-up and damage the enamel.
• Be sure to select the appropriate temperature and function for all foods so food and
liquids do not overflow or burn.
• Make sure the food is prepared in sufficiently large containers and that you use a
drip tray where necessary.
• Do not install the device next to curtains or soft furniture.
• Never attempt to lift the unit by the oven door or handles, as this may damage the
unit or cause personal injury.
• If the power cord is damaged, it must be replaced by the manufacturer, after-sales
service or similarly qualified person to avoid danger.
• Install the device so that the socket used for the plug is easily accessible at all times.
• Before connecting the plug of the device to the socket, check that the voltage of the
socket corresponds to the voltage indicated on the type plate of the device.
EN
41