Taurus TRIN&SHAVE BODY Manual De Instrucciones página 17

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 1
Anomalies and repair
- Take the appliance to an authorised
technical support service if problems
arise.
Do not try to dismantle or repair
without assistance, as this may be
dangerous.
- If the connection to the mains has
been damaged, it must be replaced
and you should proceed as you would
in the case of damage.
For EU product versions and/or in
case that it is requested in your
country:20111124~115126
Ecology and recyclability of the
product
- The materials of which the packa-
ging of this appliance consists are
included in a collection, classification
and recycling system. Should you
wish to dispose of them, use the
appropriate public recycling bins for
each type of material.
The product does not contain
concentrations of substances that
could be considered harmful to the
environment
Waste from Electric and Electronic
Equipment (WEEE).
TRIM.indb 17
This symbol means that in
case you wish to dispose of
the product once its working
life has ended, take it to an
authorised waste agent for
the selective collection of
This symbol means that
product may include a
battery or batteries; user
must to remove them
before disposing of the product.
Remember that batteries must be
disposed of in duly authorised
containers. Do not dispose of them in
fire. Remember that batteries must
be disposed of in duly authorised
containers. Do not dispose of them in
fire.
How to remove the batteries from the
interior of the device:
It is important that the batteries are
fully discharged prior to its with-
drawal from the apparatus.
To remove the batteries, once the life
of the appliance, proceed as follows:
- Open the top shell of the apparatus,
removing previously with the help of a
screwdriver fixing screws (Fig 2)
- Separate the two parts of the
appliance body (Fig 3).
- Identify the battery wires and cut
their (Red and Black).
- To avoid risks of a short circuit with
a possible residual battery load, first
cut the Red wire and protect it by
using insulating tape, then proceed to
cut the Black wire proceeding in the
same way. (Fig 4)
- Safely remove the battery from its
housing.
This appliance complies with Direc-
tive 2006/95/EC on Low Voltage,
Directive 2004/108/EC on Electro-
magnetic Compatibility, Directive
2011/65/EC on the restrictions of the
use of certain hazardous substances
in electrical and electronic equipment
and Directive 2009/125/EC on the
ecodesign requirements for energy-
related products
23/04/2014 16:37:19
loading