Instructions for use
Before use:
- Make sure that all the product's
packaging has been removed.
- Before using this product for the
first time, it is important to make a
full charge of batteries.
- Prepare the appliance according to
the function you wish to use.
Insertion of comb guide:
- Grasp the comb guide by both ends
and tighten against the blades (Fig.
1).
-To remove the comb guide, simply
push upwards from one of the sides.
Do not pull the teeth upwards.
Use:
- The appliance must be used only
with the batteries previously charged.
- Turn the appliance on using the on/
off switch.
The appliance gives you the choice of
trimming or shaving.
To trim:
- Attach the comb guide #1(3mm) to
the appliance by pressing until it fits
into its position with the teeth facing
downwards.
- Cut the hair moving the appliance in
the opposite direction of the natural
growth of the hair.
- Always ensure that the teeth of
the comb guide are pointing in the
direction in which the appliance is
moving.
TRIM.indb 16
To shave:
- Remove the comb guide attached to
the appliance.
- Support the shaver head against
the skin.
- Stretch the skin with your free hand
so that the hair stands up
- Do not exercise too much pressure
and make sure that the skin is
stretched when you move the shaver
over it.
- Move the appliance in the opposite
direction of the natural growth of the
hair exercising a slight pressure.
Once you have finished using the
appliance:
- Turn the appliance off, using the on/
off switch.
- Clean the appliance
- Tap the shaver head slightly on a
flat surface to remove any remaining
hairs, clean using the brush and rinse
with tepid water.
Cleaning
- Disconnect the charger from the
mains and let it cool before underta-
king any cleaning task.
- Clean the equipment with a damp
cloth with a few drops of washing-up
liquid and then dry.
- Do not use solvents, or products
with an acid or base pH such as
bleach, or abrasive products, for
cleaning the appliance.
Do not submerge the appliance in
water or any other liquid, or place it
under a running tap.
23/04/2014 16:37:19