Technical Specifications Table; Protections; Lock Protection; Thermal Protection - Cebora SYNSTAR 400 TS Manual De Instrucciones

Mains voltage U1
Tolerance U1
Mains frequency
Delayed fuse
Power consumed
Mains connection Zmax
Cos Φ
Welding current range
X Duty cycle according to standard IEC 60974-1
Open-circuit voltage U0
Maximum welding gas pressure
Maximum wire spool size
Usable electrodes
Performance ɳ
Consumption in stand-by
EMC emissions class
Overvoltage class
Degree of pollution according to IEC 60664
Certifications
Degree of protection
Weight
Dimensions (WxDxH)
2�2

Protections

2�2�1

Lock protection

If the welder malfunctions, a WARNING message may appear on display1. This identifies the type of defect. If the
message is still present after turning the machine off and on, contact the assistance service.
2�2�2

Thermal protection

This device is protected by a thermostat which prevents the machine from operating if the allowable temperatures are
exceeded. Under these conditions, the fan continues to operate and display 1 shows the flashing WARNING CODE tH.
3

INSTALLATION AND START UP

The system must be installed by qualified personnel. Carefully read the "Staff obligations and qualifications" section
in General Warnings code 3301151.
During transport of the device, ensure that applicable national and regional accident prevention guidelines and
regulations are observed. This applies in particular to guidelines concerning transport and shipping risks.
Carefully read the "Lifting and transporting" section in General Warnings code 3301151
Tipping a device over may endanger life! Position the device stably on a solid, flat base.
A maximum angle of inclination of 10° is allowed. Do not lift or transport live devices. The machine should not be
positioned on sloping planes, to prevent tilting or any uncontrolled movement.

TECHNICAL SPECIFICATIONS TABLE

MIG
3x400 V
+15% -20%
50/60 Hz
25A
17.3 kVA 100%
0.026Ω
0.99
10 – 400A
400A 100%
57V
6bar / 87psi
Ø300mm/15Kg
-
˃85%
˂50W
A
III
3
S, CE
IP23S
DANGER
MMA
3x400 V
+15% -20%
50/60Hz
25A
17.3KVA 100%
0.026Ω
0.99
10 – 380A
380A 100%
57V
6bar / 87psi
-
Ø1.5 – 6.0mm
˃85%
˂50W
A
III
3
S, CE
IP23S
111Kg
527x1078x1398
35/58