Tabla de contenido
Idiomas disponibles
Idiomas disponibles
SYMBOLOGY
SYMBOL
US
C
1
4
WARNING! To reduce risk of injury, always
remove battery pack before removing the tank.
CAUTION! Keep filter clean. Efficiency of
vacuum is largely dependent on the filter.
A dirty filter will reduce airflow and overall
efficiency of vacuum. Do not clean with water.
Remove from tank and tap clean or blow off
with compressed air.
REMOVING/INSERTING THE BATTERY
To remove the battery, push in the release buttons and
pull the battery pack away from the tool.
WARNING! Always remove battery pack before
changing or removing accessories.
PAGE 3 OF 15
MEANING
Volts
Direct Current
UL Listing for Canada and U.S.
1
10
2
3
9
SPECIFICATIONS
SPECIFICATIONS
PARTS
5
8
ASSEMBLY
To insert the battery, slide the pack into the body of the
tool. Make sure it latches securely into place.
REMOVING/INSERTING THE FILTER
Use the filter for dry pickup only.
1.
Remove the battery pack. Close and latch the
battery compartment.
2. Release the tank latches and lift the motor housing.
3. Remove the filter, turn it 1/2" counterclockwise and
pull it off of the motor housing/float cage.
4. Empty all debris from the tank.
5. To clean the filter, tap clean or blow dirt off with
compressed air.
DESCRIPTION
Cat. No.
Volts
Battery Type
Charger Type
Air Flow
Suction
Capacity
Recommended Ambient
Operating Temperature
PARTS LIST
#
DESCRIPTION
1
Battery Compartment Latch
2
Motor Housing
5
3
Tank
4
Tank Latch (Front and Back)
6
5
Accessories Storage Areas
7
6
Switch
7
Blower Port
8
Vacuum Inlet
9
Battery Bay
10
Intake Port
SPECIFICATION
0880-20
18 DC
M18™
M18™
45 CFM
32 inH2O
2 Gal. (7.5 L)
0ºF to 125ºF
0820 IH-8853
Tabla de contenido
