General Warnings; Particular Warnings - Sanremo SR70 Libro De Instrucciones

GENERAL WARNINGS

• Read thoroughly and stick closely to the
instructions and warnings.
• Before use, ensure that the mains voltage is
the same as the voltage indicated on the data
plate of the machine.
• Connect the appliance only to 10 Amp. sock-
ets that are efficiently earthed.
• Always remove the plug from the socket
before carrying out any maintenance or
cleaning of the appliances.
• SINGLEPHASE models are supplied complete
with cable and plug for connection to the
socket.
• Any tampering with the machine or connec-
tions not complying with the above indications
invalidate the manufacturer's guarantee.

PARTICULAR WARNINGS

• Never tamper with the machines anyway.
• For all interventions or tampering on the
machines, always apply only to the authorized
service centre.
• Never pull the power cable to remove the
plug from the socket.
• Only use the appliance for the purposes it is
meant for.
• Position the appliance a minimum of 5 cm
from wails so as to allow good aviation.
• Keep the appl ance away from sinks and jets
of water.
• Never leave the machine unguarded when
switched on.
• Keep it out of the reach of children and
incompetent people.
• Never switch on a machine that seems to be
faulty.
• Use only original accessories and parts.
• To avoid the danger of fire, never cover the
appliance.
• Unplug the appliance from the mains when it
is not in use.
• Let the appliance cool down before moving it
• In the interest of safety, the appliance must
always be considered as live.
• Take care, as the grinding blades may continue
rotating for a short while even after the appli-
ance is switched off.
• Do not let liquids of any kind come into contact
with the internal or external parts of the appli-
ance.
• Never put ground coffee in the hopper intended
only for coffee beans.
• Do not tamper with the appliance.
• Do not touch the appliance with damp or wet
hands or feet.
• THE HOPPER MUST BE FASTENED TO THE
APPLIANCES GRINDING SYSTEM BY MEANS
OF THE RELEVANT SCREW which must be
inserted in the threaded hole located on the
upper grinding blade holder and in the hole
on the neck of the hopper.
• The manufacturer cannot be held responsible
for bodily injury or damage to property if these
regulations are not complied with.
If the outlet gets blocked, unplug the
grinder/doser from the socket, remove the
hopper, unscrew the ring nut and clean thor-
oughly removing all the coffee.
If the coffee grinder is to remain inactive for a
long period, clean it carefully, dry the top con-
tainer and leave it open.
ATTENTION: Moving parts.
14