Samsung Evolution Kit SEK-2000 Manual Del Usuario página 10

Recovering a Previous State
1. Turn off the TV and then disconnect the TV power plug.
2. Detach the Evolution Kit from the TV.
Turn on the TV, navigate to Software Update (Support > Software Update), and then update the software.
3.
Update the software via the Internet. Otherwise, you will not be able to update via USB or play DRM-protected
✎
videos.
Reconnecting the Samsung Smart Control to the TV
If the Samsung Smart Control stops operating or works abnormally, try
replacing the batteries. If the problem persists, pair the Samsung Smart
Control and TV again.
Move to within a foot of the TV, and then aim the Samsung Smart
1.
Control at the TV's remote control sensor.
2. Press the RETURN button and
seconds or more.
The connection icon appears on the screen. A few moments later, the
3.
connected icon appears. The Samsung Smart Control is paired to the
TV.
[SEK-2000-SA]BN68-06252A-00L03.indb 10
GUIDE button simultaneously for 3
English-10
<The Samsung Smart Control's pairing button>
2014-04-17 2:59:56