Tabla de contenido
Declaration of Conformity
Products:
Proceq GS8000
Products:
Proceq Part Numbers:
393 50 000
Manufacturer:
Proceq SA, Ringstrasse 2
8603 Schwerzenbach, Switzerland
We confirm that the Proceq GS8000 product conform with the following directives and
standards:
Health:
EN 62749:2010
Safety standards:
EN 61010-1:2010
IP classification:
IP 65
Battery directive:
2006/66/EC
Restriction of hazardous
substances (RoHS):
2011/65/EC
Radio equipment directive:
2014/53/EU(RED)
EN 301 489-1 v2.1.1: 2017-02
EN 301 489-33 v2.2.1: 2019-04
EN 61326-1:2013
Radio compatibility
EN 302 066 v2.1.1: 2017-01
The conformity is based on all essential and specific radio test suites for that radio
equipment category identified by the involved Notified Body.
Proceq GS8000: the notified body Timco Engineering, Inc. (identification number 1177)
performed the EU-type examination in compliance with Annex III Module B of the
2014/53/EU Directive and issued the EU-type examination Certificate No. 1177-200355. The
frequency range is 40 MHz to 3440 MHz with a maximum output power of ≤ -12 dBm
(conducted).
For US product sales only (FCC ID: 2ANPE-GS8000): This device complies with part 15 of the
FCC Rules. Operation is subject to the following two conditions: (1) This device may not
cause harmful interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation. Changes or modifications not
expressly approved by the party responsible for compliance could void the user's authority
to operate the equipment. Operation of this device is restricted to law enforcement, fire and
rescue officials, scientific research institutes, commercial mining companies, and
construction companies. Operation by any other party is a violation of 47 U.S.C. § 301 and
could subject the operator to serious legal penalties.
Schwerzenbach, 30.10.2020
Patrick Waller
Chief Operating Officer
Proceq GP8000, Proceq GP8800
all
393 10 x00, XXX XX XXX
Swiss Made Declaration
Products:
Proceq Part Numbers:
Manufacturer:
We confirm that the Proceq GS8000 instrument was developed and manufactured in
Switzerland and fulfills the requirements needed for the declaration "Made in
Switzerland" or "Swiss Made".
The requirements for industrial products are specified in detail in the National Swiss
Trademark Protection Statute (Art. 47-50, MSchG) covering goods and services.
Schwerzenbach, 30.10.2020
Patrick Waller
Chief Operating Officer
Notice
This document (incl. Quick Start Guide and Product Certificates) constitutes an integral
part of Proceq's General Terms and Conditions of Sale and General Terms and
Conditions of Rental, together with any other guideline, precautions, policies and
conditions which Proceq has made and may make available to you at
www.proceq.com/downloads, as amended from time to time (the Documents). Proceq
reserves the right to change without notice any information, specifications and
recommendations contained in this document and in any of the associated Documents.
You shall observe and be solely responsible for the safe and lawful use of this product,
as well as your conduct while using it and any consequences arising thereof. The use
and operation of this product is at your own discretion and risk. Proceq hereby
disclaims any and all loss, liability or damages resulting from or out of your use of the
product. Please ensure you operate and use this product only for purposes that are
proper and in accordance with the instructions given herein together with all safety and
health precautions, applicable laws, rules, regulations, and as provided for in any of the
Documents.
EN
Proceq GS8000
393 50 000
Proceq SA, Ringstrasse 2
8603 Schwerzenbach, Switzerland
Tabla de contenido
