Install Oven - Dacor DOB30P977 Serie Manual Del Usuario

3-Wire Cable from Home Power Supply - U.S. Only
IMPORTANT: Use the 3-wire cable from home power supply where local codes
permit a 3-wire connection.
A
B
C
D
E
F
Cable from home power
A.
supply
Junction box
B.
C. Black wires (normally L1)
White wires (normally
D.
N-neutral)
E. green wires (normally
G-ground)
F. 4-wire flexible conduit from
oven
G. Red wires (normally L2)
H. UL listed wire connectors
I. UL listed or CSA approved
conduit connector
Install_DOB30P977_DG68-01308A-00_EN+MES+CFR.indb 15
1. Connect the 2 black wires (C) together
using a UL listed wire connector.
2. Connect the 2 white wires (D) and
G
the green (or bare) ground wire (of
H
the oven cable) using a UL listed wire
connector.
Connect the 2 red wires (G) together
3.
using a UL listed wire connector.
I
4. Install junction box cover.

Install oven

1.
Carefully push against front oven frame.
Install
Handle
2.
3.
4.
Using 2 or more people, lift the oven
partially into the cabinet cutout. Hang
the install handle onto the side hook of
the oven as shown below.
NOTE
Push against the seal area of the front
frame to push the oven into the cabinet
until the back surface of the front frame
touches the front wall of the cabinet.
Push oven completely into the cabinet
and center the oven into the cabinet
cutout.
Remove the tape from front trims.
• Securely fasten the oven to the
cabinet using the screws provided.
• Insert the screws through hole in
trim aligning with hole in oven
frame. Do not overtighten screws.
English 15
2020-06-24 10:12:37