Cleaning And Maintenance - Blumfeldt Goldflame Style Manual Del Usuario

CLEANING AND MAINTENANCE

Perform the following cleaning and maintenance activities on a regular basis.
Cleaning
• Keep exterior surfaces clean.
• Use warm soapy water for cleaning. Never use flammable or corrosive
cleaning agents.
• While washing your unit, be sure to keep the area around the burner and
pilot assembly dry at all times. If the gas control is exposed to water in any
way, DO NOT try to use it. It must be replaced.
• Airflow must be unobstructed. Keep controls, burner and circulation air
passageways clean. Signs of possible blockage include:
– Gas odor with extreme yellow tipping of flame.
– Heater does NOT reach the desired temperature.
– Heater glow is excessively uneven.
– Heater makes popping noises.
• Spiders and insects can nest in burner or orifices. This dangerous condition
can damage the heater and render it unsafe for use. Clean burner holes
by using a heavy duty pipe cleaner. Compressed air may help clear away
smaller particles.
• Carbon deposits may create a fire hazard. If any carbon deposits develop,
clean dome and engine with warm soapy water.
Note: In a salt-air environment (such as near the sea), corrosion occurs more
quickly than normal. Frequently check the corroded areas and repair them
promptly.
Maintenance
• Contact manufacturer or costumer service for servicing this appliance and
replacement of its parts. Maintenance of the appliance may only be carried
out by qualified personnel.
• Do not use unauthorized parts or components for this appliance, only
use original equipment replacement parts and components. The use of
unauthorized parts or components will void the warranty and can create
an unsafe condition.
Storage
• There is no limitation on the storage of the appliance indoors provided
that the cylinder is removed from the appliance.
EN
45