Cleaning, Maintenance And Storage - Blumfeldt Blackpool Heat Manual De Instrucciones

EN
16
Remote control
• Press the On/Off switch to activate the heater.
• To operate the heater on 900 W, press on the left button of the remote
control.
• To operate the heater on 1200 W, press on the right button of the remote
control.
• To operate the heater on 2100 W, press both the left and right button of
the remote control.
Touch switch
• Press on the On/Off switch to activate the heater.
• Touch the touch switch once to operate the heater on 900 W power.
• Touch the touch switch twice to operate the heater on 1200 W power.
• Touch the touch switch three times to operate the heater on 2100 W
power.
• Touch the touch switch four times to turn the heater off.

CLEANING, MAINTENANCE AND STORAGE

• Before cleaning, remove the plug from the socket and allow the unit to
cool completely.
• Do not use alcohol, gasoline, furniture polish, abrasive cleaners, solvents
or rough brushes to clean the heater. This may cause damage or
deterioration to the surface of the heater.
• To keep the heater clean, the outer shell may be cleaned with a soft, damp
cloth. You may use a mild detergent if necessary. After cleaning, dry the
unit with a soft cloth.
• Wait until the unit is completely dry before use.
• Although this heater is outdoor approved, do not immerse the heater in
water for your safety.
• The device contains parts that are not accessible to the user. Repairs may
only be carried out by qualified specialists.
• If the heater will not be used for a long period of time, store it in a cool, dry
location when not in use. To prevent dust and dirt build-up, use the original
packaging to repack the unit.