Davey EcoMatic COMM500 Instalación E Instrucciones De Funcionamiento página 85

Coloque la tapa en la caja eléctrica y fíjela con el tornillo. Desconecte el sensor de gas de la célula.
Quite el conector de latón del cable blanco de la célula. Pele el cable blanco y únalo al cable marrón del in-
terruptor de flujo mediante la unión de cables a presión incluida.
Coloque el conector de latón del cable procedente del interruptor de flujo en el sensor de gas de la célula.
Fit the lid onto the electrical enclosure and secure via the screw.
Fit the lid onto the electrical enclosure and secure via the screw.
Fit the lid onto the electrical enclosure and secure via the screw.
Disconnect the gas sensor from the cell.
Disconnect the gas sensor from the cell.
Disconnect the gas sensor from the cell.
Remove the brass connector from the white wire on the cell cable. Strip the white wire and a
Remove the brass connector from the white wire on the cell cable. Strip the white wire and at
Remove the brass connector from the white wire on the cell cable. Strip the white wire and a
wire from the flow switch via the supplied crimp.
wire from the flow switch via the supplied crimp.
wire from the flow switch via the supplied crimp.
Fit the brass connector on the lead from the flow switch onto the gas sensor on the cell.
Fit the brass connector on the lead from the flow switch onto the gas sensor on the cell.
Fit the brass connector on the lead from the flow switch onto the gas sensor on the cell.
85