Davey EcoMatic COMM500 Instalación E Instrucciones De Funcionamiento página 37

Rimettere il coperchio all'armadio elettrico e assicurarlo con la vite. Scollegare il sensore di gas dalla cella.
Rimuovere il connettore in ottone dal cavo bianco sul cavo della cella. Togliere il cavo bianco e attaccarlo al
cavo marrone che esce dal flussostato tramite l'elemento di crimpatura fornito.
Adattare il connettore in ottone sul piombo che esce dal flussostato sul sensore del gas sulla cella.
Fit the lid onto the electrical enclosure and secure via the screw.
Fit the lid onto the electrical enclosure and secure via the screw.
Fit the lid onto the electrical enclosure and secure via the screw.
Disconnect the gas sensor from the cell.
Disconnect the gas sensor from the cell.
Disconnect the gas sensor from the cell.
Remove the brass connector from the white wire on the cell cable. Strip the white wire and a
Remove the brass connector from the white wire on the cell cable. Strip the white wire and at
Remove the brass connector from the white wire on the cell cable. Strip the white wire and a
wire from the flow switch via the supplied crimp.
wire from the flow switch via the supplied crimp.
wire from the flow switch via the supplied crimp.
Fit the brass connector on the lead from the flow switch onto the gas sensor on the cell.
Fit the brass connector on the lead from the flow switch onto the gas sensor on the cell.
Fit the brass connector on the lead from the flow switch onto the gas sensor on the cell.
37