Overview Of Controls; Battery Replacement - Uline H-7826 Manual De Instrucciones

OVERVIEW OF CONTROLS

1
MICROPHONE STATUS DISPLAY
Push the Mute/ button and hold for two
seconds. The display will skip to the group
and channel selection. Push two times on
the Mute/ button to turn on mute function.
Press two more times to turn off mute function.
(See Figure 13)
MANUALLY SELECTING THE GROUP AND CHANNEL
Push and hold the Select (
the group and channel display flashes
alternately. Push the Select button to
change channel. (See Figure 14)
The wireless microphone uses two "AA" alkaline batteries
or rechargeable batteries.
• The life expectancy of two alkaline batteries is about
10 hours.
• When the power indication symbol on the display
screen is flashing (See Figure 16), the batteries
should be replaced immediately.
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
1. This device may not cause harmful interference.
2. This device must accept any interference received, including
interference that may cause undesired operation.
PAGE 6 OF 21
OPTIONAL WIRELESS MICROPHONE
2 3 4 5
.5V
1
MASTER LIST
GROUP
1 18 1
Figure 13
) button until
select
MASTER LIST
18 16
Figure 14

BATTERY REPLACEMENT

FUNCTIONS
# DESCRIPTION
6
1
Microphone Head
2
LCD Screen
3 Power/Mute Control Switch
4 Select Button
5 Microphone Input Sensitivity Adjustment
6 AA Batteries (included)
OPERATION
MICROPHONE DATA LOCK AND UNLOCK
Push the
select
Incompatible
time to lock and unlock microphone data.
When locked, channel cannot be changed.
(See Figure 15)
BATTERY DISPLAY
Displays the transmitter battery level.
(See Figure 15)
Incompatible
CHANNEL
Incompatible
MASTER LIST
GROUP CHANNEL
18 1 12
Figure 16
and button at the same
Open
Incompatible
MASTER LIST
GROUP CHANNEL
1 1
Figure 15
Close
0621 IH-7826