Uline H-7826 Manual De Instrucciones página 3

AMPLIFIER
Place amplifier on shelf. Read separate amplifier
instructions below.
GOOSENECK MICROPHONE
1. Plug microphone into the microphone jack labeled
"condenser."
2. Take female end of microphone cable; and starting
at amplifier, route cable up through opening in
microphone mount in reading surface.
3. Plug microphone into mount. Push microphone and
cable back into the microphone mount as needed.
(See Figure 8)
Figure 8
Microphone
Mount
Amplifier
Before using product, read manual for important safety
information. Retain instructions for future use.
CAUTION! Device should only be serviced by
qualified personnel.
CAUTION! Do not attempt to modify device in
any way, as this could invalidate warranty.
CLEANING
Clean amplifier with soft, dry cloth.
CAUTION! Never use benzene, paint thinner or
other chemicals to clean device.
PAGE 3 OF 21
ASSEMBLY CONTINUED
Gooseneck
Microphone
Microphone
Jack
LINE IN L+R
MAIN SEPARATE
1
ON
COMBINED
DYNAMIC VOLUME
VOLUME
WIRELESS WIRELESS
2 3
ON OFF DC IN AUX OUT
CONDENSER WIRELESS
POWER MIC
AMPLIFIER INSTRUCTIONS
SPEAKERS
Looking inside of cabinet, view backside of speaker
enclosure. Unwrap speaker wires and bring them to the
front of the amplifier. Plug them into the speaker jacks
marked "L - SPEAKER - R." (See Figure 9)
Figure 9
Speaker
Wires
LOCATION
Place amplifier in stable location, as amplifier falling
may cause damage to device or bodily harm.
INTENDED USE
Amplifier may only be used with original parts. Intended
use includes adherence to these installation instructions.
Uline accepts no liability for damage due to improper
use.
Speaker
Jacks
1
VOLUME TONE L–SPEAKER–R
3
WIRELESS LINE IN LINE OUT
AUX OUTPUT
Amplifier
0621 IH-7826