Idiomas disponibles

Idiomas disponibles

H-7825
LECTERN
TOOLS NEEDED
Phillips
Screwdriver
Camlock Pin x 20
Dowel x 18
Machine Screw x 18
1. Align paper stop over holes on top reading surface
and secure using three M4 x 28 bolts (H).
(See Figure 1)
Figure 1
PAGE 1 OF 6
1-800-295-5510
uline.com
Drill
(Optional)
Camlock x 20
Camlock Cap x 16
M4 x 28
M4 x 16
Bolt x 3
H
Two Person Assembly
Recommended
PARTS
Deep Camlock Cap x 5
M4 x 16
Wood Screw x 26
ASSEMBLY
2. Place one side panel on ground. Insert camlock
pins (A) and dowels (C) into side panel.
(See Figure 2)
Figure 2
C
A
IMPORTANT: Function of Cam
Make sure the arrow is pointing upwards
before inserting into the panel's hole.
3. Insert camlocks (B) into the holes on the bottom of
top reading surface, middle shelf and bottom panel.
Insert camlocks into the holes on the back of the
front panel. (See Figure 2)
Para Español, vea páginas 3-4.
Pour le français, consulter les pages 5-6.
L-Bracket x 4
Caster x 2
B
F
1/4 right turn
C
for locking
A
Caster with
Lock x 2
B
K
0821 IH-7825
Tabla de contenido
loading

Resumen de contenidos para Uline H-7825

  • Página 3: Herramientas Necesarias

    H-7825 800-295-5510 uline.mx ATRIL HERRAMIENTAS NECESARIAS Se Recomienda Armar Taladro Desarmador (Opcional) Entre Dos Personas de Cruz PARTES 5 Tapas Profundas para 20 Pasadores de 20 Tuercas 16 Tapas para Tuerca 4 Soportes en L Tuercas Minifix Tuerca Minifix Minifix...
  • Página 4: Continuación Del Ensamble

    Diagrama 3 Fije los Soportes en L (I) a la parte inferior de la repisa inferior usando seis tornillos para madera M4 x 16 (J). (Vea Diagrama 4) Diagrama 4 800-295-5510 uline.mx PAGE 4 OF 6 0821 IH-7825...

Tabla de contenido