Uline H-7826 Manual De Instrucciones página 2

2. Lay top reading surface, middle shelf, bottom panel
and front panel with speakers on a flat surface with
cutouts facing up.
3. Insert dowels
into open holes
along end of
panel. Take cam
locks, and with
fingers, press
one into each
cutout; or, tap in
softly with rubber
mallet.
(See Figure 2)
4. Place front panel with speakers on a smooth,
non-marring surface.
5. Take right side panel and align holes with cam locks
and dowels sticking out of front panel with speakers.
Tap into place. (See Figure 3)
Figure 3
Dowel
6. Lock panel in place by rotating cam lock with
screwdriver, carefully turning lock clockwise until fully
inserted. (See Figure 4)
IMPORTANT: Function of Cam
1/2 Right Turn
for Locking
Make sure the arrow is pointing upwards
before inserting into the panel's hole.
NOTE: Do not overtighten cam locks.
PAGE 2 OF 21
ASSEMBLY CONTINUED
Figure 2
Cam Lock
Cutout
Right Side
Panel
Front
Panel with
Speakers
Cam Lock
Figure 4
7. Starting with bottom panel with casters, align dowel
pins and cam locks sticking out from panel with
holes in right side panel. Tap into place. Lock cam
locks. (See Figure 5)
Figure 5
Top Reading
Surface
8. Repeat with middle shelf and top reading surface.
Lock cam locks.
9. Complete assembly by aligning bottom panel with
casters, then middle shelf and top reading surface
with holes in the left side panel. Tap into place. Lock
cam locks. (See Figure 6)
Figure 6
10. Stand lectern up. Attach speaker grille by inserting
tabs into holes on front panel. (See Figure 7)
Figure 7
Right Side Panel
Bottom
Panel with
Casters
Middle Shelf
Speaker
Grille
0621 IH-7826