Craftmade Artistry AY56 Instrucciones De Instalación página 8

Operation Instructions
HIGH Controls fan motor speed. To select
MEDIUM desired speed, press button once and
LOW release
REVERSE Controls direction of fan blades. To
reverse fan blades, press once and release.
FAN OFF Turns fan motor speed off. Press once to
turn off. To start motor speed again, hit
one of the motor speed buttons.
L-1 Controls no function on this fan.
L-2 Controls the on/off and intensity for
integrated light kit. Push and release for
on/off function. Hold down for full range
light dimming.
NOTE: The "High", "Medium" or "Low"
buttons may be used to start the fan
motor. The speed of the fan may be
changed at any time.
Common Problems
Problem A: Fan Will not Start
Remedies: 1. Check fuse or circuit breaker and replace if necessary
2. Turn off electrical power and check all wire connectors.
3. Check on/off TCS and wall control selector switch. See operation
instructions.
Problem B: Fan is Excessively Noisy
Remedies: 1. Check that all screws in fan assembly are tight and properly seated.
2. Check to make sure mounting bracket is installed properly.
3. Check to make sure light kit and glass reinstalled properly and tight.
4. If wall control is used, insure the wall control is not a transformer or a
variable speed type.
Problem C: Fan Wobbles
Remedies: 1. Check that all blades are screwed firmly into blade holders.
2. Check that all blade holders are screwed firmly into motor.
3. Check the weight of blades. All our blades are weighed on electronic
scales. The weight is marked on the reverse side of the fan blade near the
motor end. All of the blades should be the same weight to prevent fan
from wobbling.
4. A balancing kit is enclosed if needed.
Weight:
The weight of the complete fan, including assembly hardware is 36 lbs.
All manuals and user guides at all-guides.com
AY56
Instrucciones de instalación
Modelos: AY56
Ventiladores de
Artistry
MEJOR DISEÑO
®