Craftmade Artistry AY56 Instrucciones De Instalación página 6

11
Blade Installation
Remove rubber cushions, saving motor screws for blade installation.
Using motor screws (S5) provided, line up holes from the blade arm
with the holes in the motor housing. Tighten screws securely.
Blade Arm
12
Step 12
Attach mounting bracket for glass (3) to
base of motor with screws provided.
Screws are in parts bag with bracket.
All manuals and user guides at all-guides.com
Step 11
Mounting
Bracket for
Glass (3)
13
Attach two of the fixture plate screws (S10) to fan motor housing base (7)
allowing room for fixture plate to be attached. Before attaching fixture
plate, attach black wire from fixture plate to black wire on motor housing
by connecting plugs together. Next attach white wire from fixture plate to
white wire on motor housing. Attach fixture plate (8) to base of motor
housing by rotating fixture plate into keyhole slots being careful not to
pinch wires. Attach remaining two screws in holes as shown in diagram.
Secure all screws firmly.
14
Attach glass (9) to
mounting bracket for glass
(3) using finial plate (13)
and finial (14) as shown in
diagram below.
Step 13
Fan Motor Housing (7)
Fixture Plate Screws (S10)
Fixture Plate (8)
Step 14
Glass (9)
Finial Plate (13)
Finial (14)