Medtronic CareLink 2490C Manual Del Paciente página 23

6. The monitor automatically dials the preprogrammed,
toll-free number.
Note: The monitor emits high-pitched tones when
dialing the preprogrammed, toll-free number.
7. The three green Sending Status lights start flashing
when the monitor is sending data. This process
typically takes less than three minutes but can take
up to 30 minutes.
Caution: In the case of an emergency, you can use your
phone to call for help. If you have an emergency while
using the monitor, press the Start/Stop button to stop
the monitor and to ensure your phone line is available.
When the monitor is done sending information, the
green Sending Complete light comes on and the
monitor beeps twice.
The monitor automatically returns to resting mode.
You can then use the telephone to make or receive
calls.
Note: If you must stop before the session is complete,
remove the antenna from over your implanted device
and press the Start/Stop button. When you are ready
to restart the session, follow the procedure in "Sending
information with your monitor" on page 19.
23