Troubleshooting; Error Message - Uniteck UNICHARGE 1,5.12 Manual Del Usuario

TROUBLESHOOTING

UNICHARGE 1,5.12

Error message

The POWER light is ON but the charge
does not start (the Charge LED is
switched off)
The Charge LED flashes
(orange/green alternatively)
Causes
The battery is charged.
The "floating" mode is
activated. The current is <
30mA, the LED indicator thus
does not switch on.
The battery voltage selected
is not appropriate (12V
selected instead of 6V)
Polarity reversal on the
battery
Critical charging status
www.uniteck.fr
Solution
Normal situation. The charger
will go back to its charge
when the voltage drops. The
LED indicator will then
become orange again.
Select the correct battery
voltage.
Check the wiring.
The light will not flash more
than 5 seconds: the LED
indicator will then become
orange, meaning that the
battery is charging.
EN
19/34