Tabla de contenido
Idiomas disponibles
Idiomas disponibles
Dear customer, thank you for purchasing one of our Uniteck products. Please read all the instructions
carefully and thoroughly before using the product.
UNICHARGE 1,5.12 / 4.12 / 8.12
Unicharge is a professional battery charger, ideal to fully and perfectly recharge all lead-acid batteries
automatically (without supervision)
- liquid electrolyte
- with gel electrolyte (GEL)
- AGM (or maintenance free)
UNICHARGE 1,5.12
Unicharge 1.5.12 has been designed to recharge 6V (3 cells of 2V) and 12V (6 cells of 2V) batteries from
8Ah to 40Ah. Using its 4 charging stages, it is ideal to recharge motorcycle, scooter or alarm batteries etc.
UNICHARGE 4.12 et UNICHARGE 8.12
Using the 8-step charging curve for the 4A model and 9 steps for the 8A model, the microprocessor-
controlled, Unicharge 4.12 and Unicharge 8.12 guarantee optimal charging of your batteries and extend
their lifespan to its full potential.
UNICHARGE 4.12 is designed to charge 6V or 12V batteries (3 cells of cells or 6 cells of 2V) from 2 to 80
Ah (maintenance of charges up to 120Ah)
-UNICHARGE 8.12 is designed to charge 12V batteries (6 cells of 2V) from 10 to 160 Ah (maintenance of
charges up to 250Ah)
They are particularly suitable for charging batteries for solar fences, alarms, vehicles (cars, motorcycles,
motorhomes/caravans, scooters, snow scooters, tractors and agricultural machinery and also for boats).
Their "Manual charge" function allows recovering of very deeply discharged batteries (from 0V) that can
not be recovered with an automatic charge (see MANUAL CHARGE). The RECOND function (UNICHARGE
8.12 only) restores the batteries which have lost their capacity to store energy due to the lamination of
their electrolyte (see RECONDITIONING).
CONTROL PANEL: UNICHARGE 1,5.12
ON/OFF indicator:
Green light :
Charger ON
Battery voltage selection : 6V/12V
www.uniteck.fr
Battery charge status indicator
Orange light: battery charging
Green light: battery charged
Switched off + POWER light ON:
cf. troubleshooting table p.19
EN
13/34
Tabla de contenido
